您当前的位置:检测资讯 > 其他

中华人民共和国关于《钢质无缝气瓶 第3部分:正火处理的钢瓶》的规定

嘉峪检测网        2016-09-27 09:53

通报号: G/TBT/N/CHN/1163
ICS号: 23.020.30
发布日期: 2016-01-07
截至日期: 2016-03-07
通报成员: 中华人民共和国
目标和理由: 保护人类安全和健康
内容概述: 本部分规定了正火或正火后回火处理的钢质无缝气瓶的型式和参数、技术要求、试验方法、检验规则、标志等。
正文: 
世界贸易组织
G/TBT/N/CHN/1163
2016-01-07
16-0146
 
技术性贸易壁垒
原文:
 
通 报


                   以下通报根据TBT协定第10.6条分发

1.
通报成员: 中国
如可能,列出涉及的地方政府名称 ( 3.2条和7.2 条):
2.
负责机构:中国国家标准化管理委员会(SAC)
3.
通报依据条款:
[X] 2.9.2
[ ] 2.10.1
[ ] 5.6.2
[ ] 5.7.1
通报依据的条款其他:
4.
覆盖的产品: 钢质无缝气瓶
HS编码:7311   ICS编码:23.020.30
5.
通报标题: 《钢质无缝气瓶 第3部分:正火处理的钢瓶》

语言:中文 页数:45 链接网址:
 
6.
内容简述:本部分规定了正火或正火后回火处理的钢质无缝气瓶的型式和参数、技术要求、试验方法、检验规则、标志等。
7.
目标与理由:保护人类健康和安全
8.
相关文件: TSG R0006-2014《气瓶安全技术监察规程》
9.
拟批准日期:WTO秘书处分发后90天
拟生效日期:批准后6个月
10.
意见反馈截止日期: WTO秘书处分发后60天
11.
文本可从以下机构得到:
[ ] 国家通报机构
[X] 国家咨询点,或其他机构的联系地址、传真及电子邮件地址(如能提供):

正文(英): 

NOTIFICATION

The following notification is being circulated in accordance with Article 10.6

 

1.

Notifying Member: China

If applicable, name of local government involved (Article 3.2 and 7.2):

2.

Agency responsible: Standardization Administration of China (SAC)

Name and address (including telephone and fax numbers, email and website addresses, if available) of agency or authority designated to handle comments regarding the notification shall be indicated if different from above:

3.

Notified under Article 2.9.2 [X], 2.10.1 [ ], 5.6.2 [ ], 5.7.1 [ ], other:

4.

Products covered (HS or CCCN where applicable, otherwise national tariff heading. ICS numbers may be provided in addition, where applicable): Seamless steel gas cylinders. Containers for compressed or liquefied gas, of iron or steel (HS: 7311). Gas pressure vessels, gas cylinders (ICS: 23.020.30)

5.

Title, number of pages and language(s) of the notified document: National Standard of the P.R.C. Seamless steel gas cylinders – Part 3: Normalized cylinders (45 pages, in Chinese)

6.

Description of content: This standard specifies types, parameters, technical requirements, test methods, inspection rules, stamp marking of normalizing and tempering seamless steel gas cylinders.

7.

Objective and rationale, including the nature of urgent problems where applicable: Protection of human health or safety

8.

Relevant documents: TSG R0006-2014, Supervision Regulation on Safety Technology for Gas Cylinders

9.

Proposed date of adoption: 90 days after circulation by the WTO Secretariat

Proposed date of entry into force: 6 months after adoption

10.

Final date for comments: 60 days after circulation by the WTO Secretariat

11.

Texts available from: National enquiry point [X] or address, telephone and fax numbers and email and website addresses, if available, of other body:

https://members.wto.org/crnattachments/2016/TBT/CHN/16_0020_00_x.pdf

 

本网维权及免责声明:

      ①凡本网所有原始/编译文章及图片、图表的版权均属江苏省技术性贸易措施信息平台(www.tbtguide.com)所有,如要转载,需注明"信息来源:江苏省技术性贸易措施信息平台"或"信息来源:tbtguide"。违反上述规定者,本网将保留追究其侵权责任的权利。

      ②凡本网注明"信息来源:XXX(非tbtguide)"的作品,均转载自其他媒体,转载目的在于传递更多的信息,并不代表本网赞同其观点和对其真实性负责。

      联系E-mail:js_wto@163.com

分享到:

来源:未知

相关新闻: