您当前的位置:检测资讯 > 其他

中华人民共和国关于固定式压力容器安全技术监察规程

嘉峪检测网        2015-10-03 10:40

通报号: G/TBT/N/CHN/1130
ICS号: 23.020
发布日期: 2015-08-25
截至日期: 2015-10-24
通报成员: 中华人民共和国
目标和理由: 保护人类安全和健康;保护财产
内容概述: 本技术规程对压力容器的设计、生产、安装、维护和维修、更换、检查、运行等规定了强制基本安全要求。适用于中华人民共和国特种设备安全法管辖、在中国境内生产和交付使用的固定式压力容器。本技术规程是对现在有效的固定式压力容器安全技术监察规程(2009年版)的修订。
正文: 
世界贸易组织
G/TBT/N/CHN/1130
2015-08-25
15-4292
 
技术性贸易壁垒
原文:英语
 
通 报


                   以下通报根据TBT协定第10.6条分发

1.
通报成员: 中国
如可能,列出涉及的地方政府名称 ( 3.2条和7.2 条):
2.
负责机构:国国家质量监督检验检疫总局
3.
通报依据条款:2.9.2,5.6.2
4.
覆盖的产品: 固定式压力容器;压缩气体或液化气体容器,钢或铁制。液体存储设备。 ICS: 23.020 HS: 7311
HS编码:7311   ICS编码:23.020
5.
通报标题: 固定式压力容器安全技术监察规程。

语言:汉语 页数:127 链接网址:
 
6.
内容简述: 本技术规程对压力容器的设计、生产、安装、维护和维修、更换、检查、运行等规定了强制基本安全要求。适用于中华人民共和国特种设备安全法管辖、在中国境内生产和交付使用的固定式压力容器。本技术规程是对现在有效的固定式压力容器安全技术监察规程(2009年版)的修订。
7.
目标与理由:保护人员和财产安全。
8.
相关文件: 中华人民共和国特种设备安全法; 固定式压力容器安全技术监察规程(2009年版)。
9.
拟批准日期:2015/10/01
拟生效日期:2016/03/01
10.
意见反馈截止日期: WTO秘书处分发之后60天
11.
文本可从以下机构得到:

正文(英): 

NOTIFICATION

The following notification is being circulated in accordance with Article 10.6

 

1.

Notifying Member: China

If applicable, name of local government involved (Article 3.2 and 7.2):  

2.

Agency responsible: General Administration of Quality Supervision Inspection and Quarantine

Name and address (including telephone and fax numbers, email and website addresses, if available) of agency or authority designated to handle comments regarding the notification shall be indicated if different from above:  

3.

Notified under Article 2.9.2 [X], 2.10.1 [ ], 5.6.2 [X], 5.7.1 [ ], other:

4.

Products covered (HS or CCCN where applicable, otherwise national tariff heading. ICS numbers may be provided in addition, where applicable): Stationary pressure vessels; Containers for compressed or liquefied gas, of iron or steel. (HS: 7311); Fluid storage devices (ICS: 23.020)

5.

Title, number of pages and language(s) of the notified document: Technical Supervision Regulation for Safety of Stationary Pressure Vessels (127 pages, in Chinese).    

6.

Description of content: This technical regulation lays down the compulsory essential safety requirements for design, manufacture, installation, maintenance and repair, alternation, inspection, in-service, etc. of pressure vessels. It applies to the stationary pressure vessels covered bySpecial Equipment Safety Law of the People's Republic of China,manufactured and put into service within the territory of the P.R China. This technical regulation is the revision of the Supervision Regulationon Safety Technologyfor Stationary Pressure Vessel (2009Edition) which is effective now.

7.

Objective and rationale, including the nature of urgent problems where applicable: To protect personal and property safety

8.

Relevant documents: Special Equipment Safety Law of the People's Republic of China;

Supervision Regulation on Safety Technology for Stationary Pressure Vessel (2009 Edition)

9.

Proposed date of adoption: 1 October 2015

Proposed date of entry into force: 1 March 2016

10.

Final date for comments: 60 days after circulation by the WTO Secretariat

11.

Texts available from: National enquiry point [ X] or address, telephone and fax numbers and email and website addresses, if available, of other body:

WTO/TBT National Notification and Enquiry Center of the People's Republic of China

Tel.: +86 10 84603950/84603782

Fax: +86 10 84603811

E-mail: tbt@aqsiq.gov.cn

https://members.wto.org/crnattachments/2015/TBT/CHN/15_3287_00_x.pdf

 

本网维权及免责声明:

      ①凡本网所有原始/编译文章及图片、图表的版权均属江苏省技术性贸易措施信息平台(www.tbtguide.com)所有,如要转载,需注明"信息来源:江苏省技术性贸易措施信息平台"或"信息来源:tbtguide"。违反上述规定者,本网将保留追究其侵权责任的权利。

      ②凡本网注明"信息来源:XXX(非tbtguide)"的作品,均转载自其他媒体,转载目的在于传递更多的信息,并不代表本网赞同其观点和对其真实性负责。

      联系E-mail:js_wto@163.com

分享到:

来源:未知

相关新闻: